Cut your electricity bill. Keep your operations exactly as they are.
VidyutAI™ is our AI-assisted energy intelligence platform. It reads how your consumption is billed and recovers the avoidable cost — where it exists — for hospitals, campuses, municipal bodies, industries, commercial buildings and housing societies alike. Your machines keep running exactly as before.
Your bill is more than your units.
A large electricity bill depends on far more than the units you consume. It is assembled from dozens of interacting parameters — demand structures, penalty and incentive clauses, time-based rates, category rules and metering factors. Much of the avoidable cost sits in how consumption is billed and controlled, not in the consumption itself. Reading these interactions correctly, month after month, across every connection, is beyond manual review. That is precisely what VidyutAI was built for.
Every rupee of saving is verifiable from the Discom bill itself, line by line — no "estimated" savings.
The VidyutAI platform.
An AI-assisted bill-analytics engine, precision site instrumentation, smart optimisation hardware and a regulatory-intelligence layer. It deconstructs 12–24 months of your bills across 100+ billing and electrical parameters and computes, connection by connection, the recoverable value.
PenaltyGuard
Detects the penal and surcharge components most facilities pay month after month without realising they are avoidable — and eliminates them through targeted optimisation at your installation.
DemandOptima
Models the gap between the capacity you are billed for and the capacity your operations actually need, then closes it — the single largest recurring saving in most engagements.
ClaimMax
Qualifies you for rebates and incentives written into the tariff that most consumers never earn or never claim — and verifies that every credit actually lands on the bill.
AuditTrace
Scans historic bills for metering-factor errors, duplicate charges and unadjusted amounts, then files corrections and refund claims in your name.
Smart Energy Management
Sensors and controls for lighting, AC and HVAC with real-time dashboards — the IoT engineering foundation VidyutAI is built on. See our IoT & smart systems →
The specific levers, sequencing and engineering design applied to your facility are our confidential work product, disclosed under NDA in the audit report.
Five phases. One signature to start.
- Weeks 1–2
Bill intelligence scan
The analytics engine ingests 12–24 months of bills for every connection and screens them across 100+ billing, tariff and electrical parameters — before we ever visit site.
- Weeks 2–4
On-site diagnostics
Precision instrumentation logs each major panel for 3–7 days. In sensitive environments the engineering is power-quality-safe. The phase is led and reviewed by a certified energy auditor.
- Week 4
Savings blueprint
Per connection: current leakage, projected monthly saving, committed minimum performance and the baseline formula. This report becomes the contract annexure — the numbers we are held to.
- Months 2–3
Deployment & regulatory work
Optimisation hardware goes in through licensed electrical contractors, with all statutory intimations handled by us. In parallel we file the Discom applications that convert engineering gains into billing gains.
- Month 4 onwards
Monitor, verify, share
Every Discom bill is reconciled against the baseline. You receive a savings statement per connection, every month — savings verified before anything is invoiced.
The audit's commercial terms are agreed up front, adjustable against the engagement if we proceed.
One framework — every meter you own.
Any organisation with significant motor, pumping or HVAC load. The intelligence engine is common; the engineering design, safeguards and shutdown windows are customised to each site.
Hospitals
- Chillers & HVAC, imaging (MRI/CT/X-ray)
- OT & sterilisation plant, lifts, pumps
- Power-quality-safe engineering for diagnostic suites
Campuses & institutions
- Universities, hotels, malls, IT parks
- Central AC plants, lifts, water pumping
- Capacity right-sizing across multiple connections
Municipal bodies
- Raw & clear water pumping stations
- Sewage treatment plants
- Street lighting feeders — recovery across hundreds of connections
Industries
- Workshop motors, compressors, process loads
- HT/LT connections, multiple feeders
- Entitlement capture and billing-error refunds
Commercial buildings
- Escalators, lifts, data rooms, food courts
- Category review and tariff entitlements
- Optimisation at the building mains
Housing societies
- Common-area lifts, pumps, streetlights
- Clubhouse HVAC
- Capacity right-sizing and billing audit at society mains
You choose how to pay. The engineering is identical.
One-Time Project
Pay once. Own everything. Keep all the savings.
- One-time project fee, quoted connection-wise after the audit
- We do everything — audit, equipment, installation, Discom paperwork, commissioning
- Equipment is yours from day one, with warranty and optional AMC
- All savings are yours from the first bill
Best forOrganisations with capex budget who want maximum long-term benefit.
Shared Savings
No investment by you. We are paid only from verified savings.
- Zero investment — equipment, installation, liaison and maintenance all on us
- Savings verified on your own Discom bill; we invoice an agreed share — no savings, no fee
- At the end of the term, all assets transfer to you free
- Budget-neutral structure suited to municipal and public bodies
Best forOrganisations that want savings without touching budget.
The savings-share ratio and the term are fixed in your proposal after the audit — not quoted here.
Your own bill is the meter.
- Baseline
- Your last 12 months of bills define the starting point — signed as a contract annexure, with no retrospective changes by either side.
- Savings
- What the old billing pattern would have cost at today's rates, minus what you actually paid — adjusted for tariff changes and any material change in consumption by a pre-agreed formula.
- Evidence
- Your own Discom bill is the proof; our panel logs are supporting evidence. You receive a one-page savings statement per connection, every month.
- Disputes
- Joint review first. Failing that, an independent certified energy auditor whose determination is binding, cost shared equally.
- Both models
- In the One-Time Project it proves the promised performance; in Shared Savings it computes our monthly share.
Verified reductions are typically 5–25% of the electricity bill — the figure depends on the site's present condition, and committed numbers are given only after the audit.
If there is little to save, we say so.
Some facilities are already well optimised. If our scan finds your recoverable value is small, the report will say exactly that — and we will either propose only the levers that remain or tell you plainly that the opportunity is too small to pursue. We would rather decline a small engagement than inflate a number we must later defend against your own bills.
Straight answers.
Will our operations be disturbed?
No. Equipment is installed at the panel or substation side, with shutdowns of a few hours, scheduled at your convenience. In sensitive environments — hospital imaging suites, IT floors, laboratories — the engineering is specifically designed to be power-quality-safe. Measurement itself needs no shutdown at all.
What do you need from us?
Electricity bills for the last 12 months (all connections), a single-line diagram or panel layout if available, a nominated coordinator for site visits, contract-demand documents and past Discom correspondence, and your operating constraints — OT schedules, pumping hours, exam periods — so shutdowns never touch critical operations.
How are savings proven?
On your own Discom bill. Your last 12 months of bills define a baseline, signed as a contract annexure. Savings are what the old billing pattern would have cost at today's rates minus what you actually paid, adjusted by a pre-agreed formula. You receive a one-page savings statement per connection, every month.
What if we are already well optimised?
The report says exactly that. We either propose only the levers that remain or tell you plainly that the opportunity is too small to pursue. We would rather decline a small engagement than inflate a number we must later defend against your own bills.
Who owns the equipment?
In the One-Time Project model, you — from day one, with warranty and optional AMC. In the Shared Savings model, we fund and maintain everything during the term, and all assets transfer to you free at the end of it. Either way, the savings continue.
Is this only for industry?
No. The same framework serves hospitals, universities and campuses, municipal water pumping and street lighting, hotels, malls, IT parks, commercial buildings and housing societies — any organisation with significant motor, pumping or HVAC load.
How long until we see the first results?
Within 3–4 weeks of sharing your bills you receive a connection-wise savings report with committed numbers. Billed savings begin after deployment; gains that depend on Discom sanction are sequenced into the savings schedule, so nothing is promised before it is bankable.
Send us one electricity bill.
One bill is enough for a first read. We will show you where the avoidable cost sits — typically 5–25% of the electricity bill, depending on the site's present condition, with committed numbers given only after the audit. Audit terms are agreed up front.
Let's Automate.
Let's Lead India.
Send one electricity bill. We will tell you plainly what VidyutAI can recover — and if the answer is "not much", we will say that too.